The switches are broadband, with the ADRF5024 yielding flat frequency response from 100MHz to 44GHz, while the ADRF5025 from 9kHz to 44GHz, with repeatable characteristics better than 1.7dB insertion loss and 35dB channel to channel isolation.
Both parts support 27dBm power handling for both through and hot-switching conditions. The new switches come in a compact, 2.25mm x 2.25mm surface-mount-technology (SMT) compatible package, which will benefit radio frequency (RF) and microwave design experts, saving bias power, eliminating peripheral components and achieving higher integration in systems such as phased arrays, portable instrumentation, high resolution body scanners and next generation millimeter-wave communication infrastructure for emerging 5G and high-constellation satellite networks.
The ADRF5024 and ADRF5025 employ inherent reflective architecture and are characterized for operating temperature range of –40°C to 105°C. All pins incorporate robust Electro-Static-Discharge (ESD) protection. The devices are nominally powered by ±3.3 V, drawing low supply current of less than 120 µA typical.The devices use standard positive logic control voltages, simplifying the interface design.
The ADRF5024 and ADRF5025 are intended as replacements for PIN diode-based counterparts, as no external components are necessary for bias generation or matching, and signal pins are internally biased at ground (GND) reference to eliminate the need for direct-current (DC) blocking capacitors.
The ADRF5024 has been optimised for fast switching applications with speeds less than 10ns and edge rates at 2ns. The ADRF5025 has been optimised for ultrawideband applications with good low frequency characteristics down to 9kHz.
The other characteristics are the same so the parts are drop-in alternative to each other and can be used interchangeably on the same printed circuit board (PCB) footprint.
