The TECHNOMET range of enclosures have been engineered to very fine tolerances in order to replicate the high quality aesthetics and ergonomics usually found only on moulded plastic enclosures.
Diecast front and rear bezels fit flush in the case body giving a cohesive design and a front and rear snap-on trim hides the front panel and case fixing screws, giving a screw-free look to the housings.
The range is available in eight standard sizes ranging from 75 x 225 x 200 mm to 150 x 350 x 275 mm. All sizes are available with or without a tilt/swivel carry handle bar that doubles as a desk stand. It can be inclined in 30° increments so users can choose the optimum viewing angle. The largest desktop models are supplied with recessed side handles for easier carrying.
Each enclosure has an inner chassis which is fitted to the base panel. The wraparound top cover simply slides over the chassis and is located on hook-profiled rails on the underside – allowing swift access to the components inside.
Electronics engineers can choose between two options when fitting PCBs in the TECHNOMET case: a single PCB can be installed on four pre-fitted M3 mounting pillars in the base panel; or multiple slide-in PCBs (3, 5, 7 or 9 depending on case size) can be fitted to the chassis using clip-in anti-vibration guides (accessories). This maximises capacity and offers a wealth of PCB installation options.
The rear panel is recessed to protect switches and connectors. It can be quickly and easily removed. The anodised front panel (accessory) is also recessed to protect displays and keypads. Ventilation holes are provided as standard, and all case panels are fitted with M4 earthing pillars for electrical continuity.
All TECHNOMET enclosures are supplied fully assembled including four moulded non-slip case feet. Tilt feet are included on models without a carry handle bar.
METCASE is also able to offer a wide range of customising options including: bespoke sizes; custom front panels; CNC punching, folding, milling, drilling and tapping; fixings and inserts; custom colours and finishes; digital printing of legends and logos.
