The AH8500 and the higher accuracy AH8501, both feature an enable pin and draw a current of just 9µA in sleep mode (default mode). The devices achieve a typical current consumption of only 12µA at 20Hz and 1.16mA at the maximum 7.14kHz sample rate.
The product family also includes the AH8502 and AH8503, which feature a control pin and a default-mode sampling rate of 24Hz. These two devices consume 13µA and allow the control pin to increase the sampling rate up to 7.14kHz, with a current consumption of 1.16mA.
The higher accuracy, gain trimmed AH8501 and AH8503 devices help minimize any sample-to-sample variation and the need for any sensor calibration.The AH8501 and AH8503 have a sensitivity accuracy of 3% at room temperature and a null offset below 1% of supply voltage.
This family of sensors features internal ADCs and DACs and has a typical span linearity greater than 99.7% ensuring high linearity with the external magnetic field. A low input-referred noise characteristic of less than 0.36G helps minimise output fluctuation.
The devices' high sensitivity over its full operating range, typically 2.25mV/G at 1.6V to 4.12mV/G at 3.6V, enables designers to either boost field detection ranges or make use of weaker, lower cost magnets.
With their chopper-stabilized architecture and advanced low temperature coefficient, these sensors help to minimize output offsets, drift and internal stress effects, ensuring greater stability and robustness over the full -40ºC to +85ºC operating temperature range.These devices also feature a high ESD of 6kV.
Packaged in the small footprint, low profile U-DFN2020-6, this family of devices is suitable for a variety of proximity, position, and travel and level detection applications.
