They are available direct from stock with no minimum order quantity and can be specified with CNC laser-cut holes and cutouts for controls and cable glands. Electropolishing is also available to give an extremely high quality corrosion-resistant finish.
ROLEC inoCASE and inoCASEmini are manufactured from 4301/V2A/AISI 304 stainless steel. Smart design features common to both include a single channel for fixing the lid and mounting the enclosure.
This design means the enclosures can be securely mounted to walls, bulkheads or machines without having to drill through the base – preserving the integrity of the electronics compartment and also saving space.
ROLEC inoCASE is available in 18 sizes (140 mm x 110 mm x 60 mm to 430 mm x 300 mm x 120 mm), each with a gasket compression ridge in the base, a continuous foam gasket in the lid and M5 mounting and earthing points.
There are six sizes of inoCASEmini (from 100 mm x 70 mm x 50 mm to 200 mm x 90 mm x 60 mm), each with a smooth base (no ridge), a continuous foam lid gasket and M4 mounting and earthing points.
Options for inoCASE and inoCASEmini include IP 67 protection, an internal mounting plate and support rails.
ROLEC also offers an in-house laser cutting service of holes and cutouts for controls, switches, connectors and cable glands, plus laser engraving of legends and logos.
