RDS Announces Fujitsu’s New AMD based GX-420CA SoC Quad-Core Mini-ITX Mainboard
1 min read
Providing Impressive graphic performance for Industrial and Semi-industrial Applications. The D3313-S3 with AMD Radeon HD8400E graphics and LVDS interface built –in is an ideal engine to drive TFT LCD panels.
Review Display Systems Ltd, specialist provider of optimal technical and commercial display systems and embedded computing solutions, introduces Fujitsu's new Mini-ITX Mainboard based on the AMD Embedded G-Series SoC (System-on-Chip) platform. Designated D3313-S, the board has been optimised for a wide range of industrial and semi-industrial applications; provides continuous 24/7 operation in an extended temperature range of 0 to +60°C, and will have a product life-cycle of at least 5 years.
Three different AMD embedded G-Series SoC processor Options make it possible to offer designers the optimum solution for their specific requirements:
Featuring impressive Graphic performance the D3313-S3 uses the GX-420CA SoC Quad-core APU (Advanced Processing Unit) with the powerful integrated Radeon HD8210E graphics core, Clocked at 2.0GHz, the units maximum TDP (Thermal Design Power) is only 25W making this powerful board ideal for applications requiring a lot of graphics processing for minimal power usage.
For applications not so demanding the D3313-S2 version uses the GX-217GA SoC, Dual-Core APU with AMD Radeon HD8280E Graphics. The APU is Clocked at 1.65GHz with a Max TDP of 15W.
Finally for cost driven, low power applications the D3313-S1 uses the GX-210HA SoC, Dual Core APU (Advanced Processing Unit) with AMD Radeon HD8210E Graphics. APU Clocked at 1.00GHz with a Max TDP of just 9W
The advantages of the D3313-S series of mainboards compare very favourably with the D3003-S – the current very successful Fujitsu Mini-ITX platform: Thermal Design Power is much reduced while performance is significantly higher by as much as 98%. The D3313-S has Mini PCIe with USB support on-board and USB3.0 support; competitive 'performance per pound' pricing; excellent production life-cycle starting Q4-2013 until Q4-2018; Mini-ITX chassis DS3003 fits D3313 as well (same I/O layout as previous D3003-Sx board).
The Fujitsu D3313-S enables ruggedised storage with its new m-SATA-connector, mounting kit, possible wireless connections via PCIe-Minicard-socket and the extended PCIex4 expansion slot. In terms of display interface, all three versions will have available DVI-I DisplayPort and 24 bit dual-channel LVDS.
RDS provides full technical support and applications advice to support the new Fujitsu D3313-S Mini-ITX Mainboard series.