Artesyn’s New 40W & 50W 2x1 Industrial DC-DC Converters
1 min read
Artesyn's latest AEE series 40W & 50W high density DC-DC converters are designed for industrial and rugged applications. 24 new voltage variants cover a wide range of high density applications and both new series cover an ultra-wide 4:1 input voltage range. Standard -40°C to +80°C operation can be extended by using an optional clip-on heat sink. The Artesyn AEE series offers up to 92% efficiency in a 2x1 inch fully potted and metal cased package.
Artesyn Embedded Technologies have two new series of 1 x 2 inch (25.4 x 50.8 mm) isolated DC-DC converters for industrial applications where high power density is required: the new AEE 40 W and 50 W series. A fully potted and shielded metal case construction makes the two new Artesyn AEE series an ideal choice for harsh environments and enables the modules to operate between minus 40 and 80 degrees Celsius. An optional clip-on heat sink is available to extend the thermal performance of the unit in a convection or forced-air environment.
Both new series of Artesyn AEE modules cover an ultra-wide 4:1 input voltage range of 9 to 36 Vdc and 18 to 75 Vdc to cover 12, 24 or 48 V nominal input rails and tight output voltage regulation. The output voltage of the single output versions can be trimmed by plus or minus 10 percent of the nominal output. The 40 W series offers single-output voltage of 3.3, 5,12, 15 or 24 V or dual output versions offering plus or minus 12 or 15 V and efficiency levels of up to 90%. The 50W series offers single-output voltages of 3.3, 5,12, 15 and 24 V and efficiency levels of up to 92%.
The converters feature low ripple and noise, overcurrent protection, and isolation up to 1500 Vdc. An industry-standard pin out simplifies PCB design and the mechanical design of customers' end product.
